Ponte del Forner

null
Basic Information
Bridge Code
Zucchetta Number
Canal Crossed
Handicapped Accessible?
Length (m)
Width (m)
Minimum Height (m)
Latitude (°)
Longitude (°)
Private
Crooked Bridge?

Overview of Bridge

The Ponte del Forner was built primarily using Metallo. It crosses the Rio de S. Boldo bridging a gap which is 5.36 meters. The bridge is not a crooked bridge. On the northern side of the bridge is the sestiere of Santa Croce and on the southern side is San Polo .There are 2 ramps. On the north side there are 11 steps, on the south side there are 12 steps. This results in a total of 23 steps. The height of a typical step is 12 meters, the thickness of a step is about 46 centimeters, and the width of a step is about 1.1 meters.The steps are paved with Asfalto. The bridge is not handicapped accessible and it does not have an additional railing. The summit is 2.03 meters wide and 7.57 meters in length for a total area of about 15.37 meters. The summit is paved with Asfalto. Also, this bridge has 1 arch. The bridge's Vuoto Decorato railing is made of Metallo and is about 4.00 meters wide is about 0.83 meters tall. Finally, the bridge protrudes 0.3 meters to the North and 0.3 meters to the South.

null

History

We're sorry, we do not yet have origins for every bridge, please check again in the future for any updates!

Location

The bridge is located at the following coordinates:

Latitude: 45.4390865° N

Longitude: 12.3297056° E