Ponte Raspi o Sansoni

null
Basic Information
Bridge Code
Zucchetta Number
Canal Crossed
Handicapped Accessible?
Length (m)
Width (m)
Minimum Height (m)
Latitude (°)
Longitude (°)
Private
Crooked Bridge?

Overview of Bridge

The Ponte Raspi o Sansoni was built primarily using Mattoni, Intonaco e Pietra d'Istria. It crosses the Rio de le Becarie bridging a gap which is 4.53 meters. The bridge is not a crooked bridge. On the northern side of the bridge is the sestiere of San Polo and on the southern side is also San Polo .There are 2 ramps. On the north side there are 5 steps, on the south side there are 8 steps. This results in a total of 13 steps. The height of a typical step is 13 meters, the thickness of a step is about 43 centimeters, and the width of a step is about 1.4 meters.The steps are paved with Asfalto. The bridge is not handicapped accessible and it does not have an additional railing. The summit is 3.37 meters wide and 2.44 meters in length for a total area of about 8.22 meters. The summit is paved with Asfalto. Also, this bridge has 1 arch. The bridge's Piena railing is made of Mattoni, Intonaco e Pietra d'Istria and is about 30.00 meters wide is about 0.98 meters tall. Finally, the bridge protrudes 0.2 meters to the North and 0 meters to the South.

null

History

The following is any history we have regarding the bridge's origins:

�to S. Cassiano. It lies between them to the palace Raspi, of which article before, and houses that were owned by the family cittadinesca Sansoni. See Sansoni (Calle, Campiello dei.

Location

The bridge is located at the following coordinates:

Latitude: 45.4388303° N

Longitude: 12.3326888° E