Ponte dei Ragusei

null
Basic Information
Bridge Code
Zucchetta Number
Canal Crossed
Handicapped Accessible?
Length (m)
Width (m)
Minimum Height (m)
Latitude (°)
Longitude (°)
Private
Crooked Bridge?

Overview of Bridge

The Ponte dei Ragusei was built primarily using Metallo. It crosses the Rio del Tentor bridging a gap which is 10.47 meters. The bridge is not a crooked bridge. On the northern side of the bridge is the sestiere of Dorsoduro and on the southern side is also Dorsoduro .There are 2 ramps. On the north side there are 9 steps, on the south side there are 9 steps. This results in a total of 18 steps. The height of a typical step is 14 meters, the thickness of a step is about 40 centimeters, and the width of a step is about 1.87 meters.The steps are paved with Asfalto. The bridge is not handicapped accessible and it does not have an additional railing. The summit is 1.87 meters wide and 3.51 meters in length for a total area of about 6.56 meters. The summit is paved with Asfalto. Also, this bridge has 1 arch. The bridge's Vuoto Decorato railing is made of Metallo and is about 7.00 meters wide is about 0.99 meters tall. Finally, the bridge protrudes 0 meters to the North and 0 meters to the South.

null

History

The following is any history we have regarding the bridge's origins:

�Carmini. Refers to the Code 351, Class VII of Marciana, the family came to Dubrovnik Ragusi, and that was \to Carmini in the street called the people of Dubrovnik. This was m. Giorgio famous d.r and let.r in Padua. \ We observe, however, that from 1319 until a \Marin Dubrovnik Marcer,\ brother of the school of St. Maria della Misericordia, was domiciled in the district of the Angel Raphael, in which the \Calle\ and the \Bridge of Ragusei\ were subjects.

Location

The bridge is located at the following coordinates:

Latitude: 45.4350508° N

Longitude: 12.3205197° E